Product ID:THERMOFIT S-1006, ADHESIVE
MSDS Date:07/01/1986
FSC:8040
NIIN:00-922-8288
Kit Part:Y
MSDS Number: BHDYK

RAYCHEM CORPORATION

300 CONSTITUTION DRIVE
MENLO PARK, CA 94025
US

Emergency Phone: 415-361-3333

Info Phone: 415-361-3333

Preparer: GREGORY RAYMOND

Cage: 06099

RAYCHEM CORPORATION

MENLO PARK, CA 94025 US

Telephone: (415)361-3333

Cage: 06099

EPICHIOROHYDRIN/BISPHENOL, A EPOXY RESIN

CAS: 25068-38-6

SILICA, AMORPHOUS, DUST

CAS: 112945-52-5

RTECS: VV7310000

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3; 8990

LD50 LC50 Mixture:ORAL LD50(RAT) = 11.4 G/KG (EPOXY RESIN)
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: SENSITIZATION OR OTHER ALLERGIC
RESPONSES
Explanation of Carcinogenicity:THE INGREDIENTS PRESENT AT 20.1% OF THE
PRODUCT ARE NOT LISTED AS SUSPECT CARCINOGENS
Effects of Overexposure:EYE: IRRITATING
SKIN: IRRITATING
INHALATION: IRRITATING
TO NOSE AND THROA TINGESTION: MAY BE IRRITATING BUT IS NOT KNOWN TO
HAVE OTHER HARMFUL EFFECTS.

First Aid:EYE: FLUSH IMMEDIATELY W/WATER FOR 15 MINS.,HOLDING EYELIDS
OPEN. GET MED. ATTN.SKIN: WASH IMMEDIATELY W/MMILD SOAP & WATER.
CONSULT PHYSICIAN INHALATION: REMOVE TO FRESH AIR.
SEEK ME DICAL ADVICEINGESTION: DO NOT INDUCE VOMITING. DILUTE
W/WATER OR MILK. SEEK MEDICAL ATTNT.

Flash Point:480F/248.89C
Extinguishing Media:CARBON DIOXIDE, WATER, DRY CHEMICAL
Fire Fighting Procedures:TOXIC FUMES MAY BE INVOLVED IN A FIRE. FIREMEN
SHOULD WEAR SELF CONTAINED BREATHING APPARATUS IN ENCLOSED
AREAS.

Spill Release Procedures:ISOLATE SPILL. REMOVE W/INERT ABSORBENT
MATERIAL, USING APPROPRIATE PRECAUTIONS TO PREVENT CONTACT OR
OTHER EXPOSURE. CLEAN UP RESIDUE WITH SOAP AND WATER.

Handling and Storage Precautions:CURING OF ADHESIVE SHOULD BE DONE IN A
WELL VENTILATED AREA. THE CURING PROCESS IS EXOTHERMIC.
Other Precautions:PREVENT CONTACT WITH SKINE & EYES. WASH HANDS
THOROUGHLY AFTER USE. USE ONLY WITH ADEQUATE VENTILATION.

Respiratory Protection:PROTECTIVE EQUIPMENT SHOULD BE BASED ON THE
OPERATION PERFORMED & PROVIDED AS NECESSARY TO PREVENT CONTACT.
Ventilation:ADEQUATE VETNILATION DURING APPLICATION.
Protective Gloves:GLOVES AS NEEDED TO PREVENT CONTACT
Eye Protection:SAFETY GLASSES/GOGGLES RECOMMENDED
Work Hygienic Practices:GOOD INDUSTRIAL HYGIENE PRACTICE
Supplemental Safety and Health
NK

Spec Gravity:>1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:VISCOUS PURPLE LIQUID WITH SLIGHT ODOR.

Stability Indicator/Materials to Avoid:YES
ACIDS, BASES, OR STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:MAY REACT EXOTHERMICALLY (RELEASE HEAT)
WITH ACIDS, BASES,ORSTRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:CARBON MONOXIDE/DIOXIDE, ACIDS,
ALDEHYDES, & NITROGEN COMPND

Waste Disposal Methods:NORMAL METHODS BASED ON FEDERAL, STATE, AND
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.